Peter Paul High Pressure Valve Model H23

GAS PRESSURE RATINGSORIFICE SIZECV FACTORVALVE NUMBERACDC1/4 NPT PORTS3000*3000*1/32.022H23GG19DCM2500*1500*3/64.041H23HH19DCMG1750*5001/16.065H23JJ19DCMG650*1003/32.100H23KK19DCMG LIQUID PRESSURE RATINGSORIFICE SIZECV FACTORVALVE NUMBERACDC1/4 NPT PORTS3000*3000*1/32.022H23GG19DCM1500*1500*3/64.041H23HH19DCML1000*5001/16.065H23JJ19DCML3001003/32.100H23KK19DCML* FKM seals not recommended for pressure above 500 psi.Ordering Information:When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (H23JJ19DCV 120/60) repair pack (KH23JJ AC) Operating Conditions:Media: Air and other non-corrosive gasses, water and oil.Filtration: Down to 60 microns or less is recommended.Valve Temperature Range:Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) mediaOptional Valves – can tolerate much higher or much lower ambient and media temperatures.*Maximum Operating Pressure Differentials: See table above.Burst Pressure: 10,000 PSILeakage: Bubbletight (with polymer sealing pins) Electrical Characteristics:Coil Voltage: 12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.Nominal Power: AC — 7.3 Watts DC — 9.5 Watts (Per Operator)Coil Construction: Molded (Std.) and Potted Class F or Class H (Opt.)Typical Response Time on Air:  4 – 16 MillisecondsOperating Speed:  Up to 600 CPMDuty Cycle:  Continuous Mechanical CharacteristicsBody: 300 Series Stainless SteelInternal Components: Stainless Steel. Copper – AC Only.Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*Sealing Pin: Kel-F (Std.)Orifice Diameter: See table above.Porting: 1/4″ NPTHousing: Grommet and 1/2″ NPT conduitMounting: Must be mounted within 30° of vertical.Life Expectancy: Millions of cycles, depending on application, lubrication, etc.Valve Weight: 3.63 lbsRepair Packs: See table above.Options: Alternate Sealing Pin Materials and Alternate Elastomers** Consult us for options and specifications