3T6B Passive Keyless Entry System for DC12V Universal Cars, PKE Engine Starter Push Button Vehicles Start/Stop Kit Safe Lock with 2 Smart Key

I got this kit because I really wanted the keyless entry and push start, and this was the cheapest one. Even the more expensive ones had problems, so I just said what the heck.Here are the problems:Short ground wires, and there are actually two wires for some reason. I snipped off the wire coming directly out of the box and used the ground on the ignition harness, and it works fine with just the one. A side note, the oil pressure wire is only used for remote start AFAIK. Using the push start activates the starter for a preset amount of time. Also, don’t connect the horn wire. I think honking the horn when you unlock and unlock would be very annoying for me personally.There is no trunk trigger or button on the remote, which is somewhat annoying if you’re coming from the store and want to load groceries. You have to open the door then open the trunk.The fobs came with no batteries. Really?There was no immobilizer bypass included, which is fine I guess but buyer beware. There were zipties included but not enough in my opinion.The button is okay quality. Sometimes I will press the button lightly and it doesn’t register.The instructions were pretty vague. If you’re going to install one of these, you must have a wiring diagram with wire colors as well as the factory wiring manual so you can see the locations of the connectors, pinouts, etc. *Make a gameplan before you order.*If you turn off the car while pressing the brake, it restarts. I would’ve rated 5 stars if not for this problem. It is so annoying. Please let me know if my unit is faulty and should not be doing this. Another annoying thing is that there are no DIP switches unlike the Easyguard kit to configure settings like these. This unit sends out a single pulse to unlock the doors, which in my car only unlocks the driver door. There is no way to reprogram this afaik. Very annoying…All in all, I would recommend this unit anyway. It’s so much more convenient than taking out the fob and key, pressing unlock, sticking the key in and turning it on.Edit 3/1 (6 months later)LEDs in push button have stopped working. It still functions.I’ve also had some issues. Sometimes when the car is on it doesn’t turn off unless I press unlock on the fob, and then I have to press the brake pedal to turn it off. It only does this maybe 1/20 times. Also, it has locked my fob inside once. The PKE antennas should be stronger. I’m also experiencing battery drain but I’m not sure if this is the culprit, I’ll update this to verify.